• <cite id="4k6vu"><listing id="4k6vu"></listing></cite>
  • 
    
      <dd id="4k6vu"></dd>
        <ul id="4k6vu"><th id="4k6vu"></th></ul>
        <cite id="4k6vu"></cite>

        Hello,Welcome to Normal Website!

        Service Items

        Contact US

        Tell:+86-571-85691658
        Fax:+86-571-28867000
        E-mail:[email protected]
        Address:North block, 9 block,, Jiangling, Binjiang District, Hangzhou, Zhejiang

        Material & Automotive Part

        HOME>>Material & Automotive Part

        Paint inks and adhesives

        Test scope

         

        Wood paint, architectural paint, industrial paint, automotive paint, toy paint, plastic paint, metal baking paint, coil steel paint, powder coating, fluorocarbon paint, rubber oil, ink, adhesive, resin, pigment, additive, solvent, etc.

         

         

         

        Routine testing items

         

        Basic performance: coating thickness, density, viscosity, fineness, moisture content, solid content, acid value;

         

        Physical properties: adhesion, pencil hardness, wear resistance, impact resistance, bending strength, cupping, scrub resistance;

         

        Optical performance: color, color difference, glossiness, coverage;

         

        Electrical properties: surface resistance, withstand voltage;

         

        Chemical resistance performance: water resistance, alcohol resistance, solvent resistance, acid and alkali resistance, oil resistance, cleaning agent resistance, pollution resistance;

         

        Thermal properties: Heat resistance, moisture and heat resistance, low temperature resistance, temperature shock, constant temperature and humidity, cold hot wet cycle of paint film

         

        Biological performance: antifungal performance;

         

        Aging performance: rapid UV aging, xenon lamp aging, salt spray test, water mist test, hot air aging;

         

        Evaluation after aging: color difference, cracking, foaming, erosion, powdering, peeling;

         

        Safety and environmental performance:

         

        VOC, Formaldehyde, benzene, toluene, xylene, free TDI, PAHs;

         

        Heavy metal testing EN 71-3, ASTM F963, ROHS;

         

        Safety and fire prevention.

         

         

         

        1. Wood paint testing items

         

        pencil hardness

         

        adhesion

         

        film thickness

         

        Glossiness of paint film

         

        low-temperature resistant

         

        Taber abrasion

         

        Rapid UV aging

         

        Solvent resistant (naphtha, butanone, xylene, Tianna water)

         

        Resistant to boiling water

         

        Pollution resistant (coffee, lemon juice, tea, chewing gum, lipstick, cola, conditioner, correction fluid, alcohol, mustard, tomato sauce, ink)

         

        formaldehyde emission

         

        Organic volatile matter detection

         

         

         

        2. Automotive paint testing project

         

        pencil hardness

         

        film thickness

         

        adhesion

         

        Glossiness of paint film

         

        Taber abrasion

         

        Anti gravel collision test

         

        thermal shock

         

        Resistant to 100% relative humidity

         

        salt spray test

         

        Paint film resistant to cleaning agents, gasoline, and engine oil

         

        Rapid UV aging

         

        xenon lamp aging

         

        Appearance evaluation after testing

         

        powder coating

         

        (European Qualicoat Standard)

         

        pencil hardness

         

        Glossiness of paint film

         

        coating thickness

         

        adhesion

         

        Cupping test

         

        impact resistance

         

        Bend Test

         

        Resistance to mortar test

         

        acid resistance

         

        salt spray test

         

        Boiling water resistance test

         

        Xenon lamp aging test

         

        Moisture and heat resistance test

         

        solvent resistance

         

        Color difference test

        Organic content analysis

         

        Standard Number Standard Name

        GB 12441 Decorative Fireproof Coatings

        GB 18581 Limit of Harmful Substances in Solvent based Wood Coatings for Interior Decoration Materials

        GB 18582 Indoor Decoration Materials - Limit of Harmful Substances in Interior Wall Coatings

        GB 24408 Limits of Hazardous Substances in Exterior Wall Coatings for Buildings

        GB 24409 Limit of Hazardous Substances in Automotive Coatings

        GB 24410 Indoor decoration materials - Limits of harmful substances in water-based wood coatings

        GB 24613 Limit of harmful substances in coatings for toys

        GB/T 10125 Artificial Atmosphere Corrosion Test Salt Spray Test

        GB/T 10834 Determination of Salt Water Resistance of Ship Paint - Salt Water and Hot Salt Water Immersion Method

        GB/T 11175 Test Methods for Synthetic Resin lotion

        GB/T 13452.1 Determination of Total Lead Content in Paints and Varnishes Flame Atomic Absorption Spectroscopy Method

        GB/T 13452.2 Determination of Film Thickness of Colored and Clear Coatings

        GB/T 13492 Colored Automotive Topcoats

        GB/T 13493 Primer for automobiles

        GB/T 14522 Test Method for Artificial Climate Aging of Plastics, Coatings, and Rubber Materials for Mechanical Industry Products - Fluorescent Ultraviolet Lamp

        GB/T 1720 Test Method for Adhesion of Paint Films

        GB/T 1721 Determination of Appearance and Transparency of Varnishes, Oils and Thinners

        GB/T 1722 Test Method for Color of Varnishes, Oils and Thinners

        GB/T 1723 Determination of viscosity of coatings

        GB/T 1724 Determination of Fineness of Coatings

        GB/T 1725 Determination of non-volatile matter content in paints, varnishes and plastics

        GB/T 1726 Determination of Coating Covering Power

        GB/T 1727 General Preparation Method for Paint Films

        GB/T 1728 Determination of drying time for paint film and putty film

        GB/T 1730 Paints and Varnishes - Swing Rod Damping Test

        GB/T 1731 Test Method for Flexibility of Paint Films

        GB/T 1732 Determination of Impact Resistance of Paint Films

        GB/T 1733 Determination of Water Resistance of Paint Films

        GB/T 1735 Determination of Heat Resistance of Paint Films for Colored and Clear Coatings

        GB/T 1740 Determination of Moisture and Heat Resistance of Paint Films

        GB/T 1747.2 Determination of pigment content in paints and varnishes Part 2: Ashing method

        GB/T 1748 Determination of Flexibility of Putty Films

        GB/T 1749 Method for determining the consistency of thick paint and putty

        GB/T 1762 Test method for determination of film rebound adhesion

        GB/T 1765 Method for Preparation of Coatings for Determination of Resistance to Damp Heat, Salt Spray, and Weather (Artificially Accelerated)

        GB/T 1766 Rating method for aging of paints and varnishes coatings

        GB/T 1768 Determination of Wear Resistance of Paints and Varnishes - Rotary Rubber Grinding Wheel Method

        GB/T 1770 Determination of Polishing Performance of Coating and Putty Films

        GB/T 1771 Determination of neutral salt spray resistance of paints and varnishes

        GB/T 18244 Aging test method for building waterproofing materials

        GB/T 18446 Determination of Diisocyanate Monomers in Lacquer based Isocyanate Resins for Paints and Varnishes

        GB/T 1865 Paints and Varnishes - Artificial climate aging and artificial radiation exposure (filtered xenon arc radiation)

        GB/T 19250 Polyurethane Waterproof Coating

        GB/T 20623 lotion for Architectural Coatings

        GB/T 20624.1 Paints and varnishes - Rapid deformation (impact resistance) test - Part 1: Drop hammer test (large-area punch)

        GB/T 20624.2 paints and varnishes - Rapid deformation (impact resistance) test - Part 2: Drop hammer test (small area punch)

        GB/T 20777 Inspection and preparation of test specimens for paints and varnishes

        GB/T 21775 Determination of flash point - Closed cup equilibrium method

        GB/T 22374 Floor Coating Materials

        GB/T 23445 Polymer Cement Waterproof Coating

        GB/T 23455 Flexible Putty for Exterior Walls

        GB/T 23981 Determination of contrast ratio between white and light colored paints

        GB/T 23982 Determination of Anti Adhesion of Wood Coatings

        GB/T 23983 Determination of Yellowing Resistance of Wood Coatings

        GB/T 23985 Determination of volatile organic compound (VOC) content in paints and varnishes - Differential method

        GB/T 23986 Paints and Varnishes - Determination of Volatile Organic Compounds (VOC) Content - Gas Chromatography Method

        GB/T 23987 Paints and Varnishes Coatings Exposed to Artificial Weathering Exposure to Fluorescent Ultraviolet Lamps and Water

        GB/T 23989 Determination of solvent wiping resistance of coatings

        GB/T 23990 Determination of benzene, toluene, ethylbenzene and xylene content in coatings Gas chromatography method

        GB/T 23991 Determination of soluble harmful elements content in coatings

        GB/T 23992 Determination of Chlorinated Hydrocarbon Content in Coatings Gas Chromatography Method

        GB/T 23993 Determination of formaldehyde content in water-based coatings Acetylacetone spectrophotometric method

        GB/T 23995 Solvent based alkyd wood coatings for interior decoration and renovation

        GB/T 23996 Solvent based Metal Sheet Coatings for Interior Decoration

        GB/T 23997 Solvent based Polyurethane Wood Coatings for Interior Decoration

        GB/T 23998 Solvent based Nitrocellulose Wood Coatings for Interior Decoration

        GB/T 23999 Water based Wood Coatings for Interior Decoration

        GB/T 24147 Water soluble UV curable resin Water soluble unsaturated polyester acrylic resin

        GB/T 25249 Amino alkyd resin coatings

        GB/T 25251 Alkyd Resin Coatings

        GB/T 25252 Phenolic Resin Anti rust Coating

        GB/T 25253 Phenolic Resin Coatings

        GB/T 25258 Perchloroethylene Resin Anti corrosion Coatings

        GB/T 25259 Perchloroethylene Resin Coatings

        GB/T 25263 Chlorinated Rubber Anti corrosion Coatings

        GB/T 25264 Solvent based Acrylic Resin Coatings

        GB/T 25271 Nitro Coatings

        GB/T 25272 Nitro Coatings Moisture Resistant Agents

        GB/T 2594 Colored Amino Drying Enamel

        GB/T 27806 Epoxy Asphalt Anti corrosion Coating

        GB/T 3181 Paint Film Color Standard

        GB/T 3186 Sampling of raw materials for paints, varnishes, and paints and varnishes

        GB/T 5208 Determination of flash point - Rapid equilibrium closed cup method

        GB/T 5209 Determination of water resistance of paints and varnishes by immersion method

        GB/T 5210 Paints and Varnishes - Adhesion Test by Pull off Method

        GB/T 5211.3 Determination of Volatile Matter of Pigments at 105

        GB/T 5950 Measurement method for whiteness of building materials and non-metallic mineral products

        GB/T 6739 Paints and Varnishes - Determination of Film Hardness by Pencil Method

        GB/T 6742 Paints and Varnishes - Bend Test (Cylindrical Shaft)

        GB/T 6743 Determination of Acid Value and Total Acid Value of Polyester Resin, Paint and Varnish Used for Plastics

        GB/T 6745 Ship Shell Paint

        GB/T 6746 Marine Oil Tank Paint

        GB/T 6748 Marine Antirust Paint

        GB/T 6750 Determination of density of paints and varnishes by pyknometer method

        GB/T 6753.1 Determination of Grinding Fineness of Paints, Varnishes, and Printing Inks

        GB/T 6753.2 Surface Drying Test for Coatings - Small Glass Ball Method

        GB/T 6753.4 Determination of flow time for paints and varnishes using a flow cup

        GB/T 6753.6 Large area brushing test for coating products

        GB/T 9261 Deck Paint

        GB/T 9262 Marine cargo hold paint

        GB/T 9265 Determination of Alkali Resistance of Architectural Coatings

        GB/T 9266 Determination of scrub resistance of architectural coatings

        GB/T 9267 Determination of White Point Temperature and Minimum Film Forming Temperature of lotion for Paints and Polymer Dispersions for Paints and Plastics

        GB/T 9268 Determination of Freeze Thaw Resistance of Latex Paint

        GB/T 9269 Determination of viscosity of coatings Stomer viscometer method

        GB/T 9272 Paints and Varnishes - Determination of Non Volatile Matter Volume Fraction of Coatings by Measuring Dry Coating Density

        GB/T 9273 Non marking Test for Paint Films

        GB/T 9274 Determination of resistance to liquid media for paints and varnishes

        GB/T 9278 Temperature and Humidity for Condition Adjustment and Testing of Coating Samples

        GB/T 9279 Scratch test for paints and varnishes

        GB/T 9280 Test for palletizing resistance of paints and varnishes

        GB/T 9281.1 Assessment of Color Grades for Transparent Liquids - Part 1: Visual Method

        GB/T 9284 Determination of softening point of paint base for paints and varnishes Global method

        GB/T 9286 Paint film grid test

        GB/T 9750 Packaging Marking for Coating Products

        GB/T 9753 Cupping test for paints and varnishes

        GB/T 9754 Paints and Varnishes - Determination of 20 °, 60 °, and 85 ° Mirror Gloss of Paint Films without Metallic Pigments

        GB/T 9755 Synthetic resin lotion exterior wall coating

        GB/T 9756 Synthetic resin lotion interior wall coating

        GB/T 9757 Solvent based Exterior Wall Coatings

        GB/T 9758.1 Determination of "soluble" metal content in paints and varnishes Part 1: Determination of lead content Flame atomic absorption spectrometry and dithizone spectrophotometric method

        GB/T 9761 Visual comparison of paints and clear paints

        GB/T 9779 Multi layer Architectural Coatings

        GB/T 9780 Test Method for Stain Resistance of Architectural Coatings Coatings

        GB/T6753.3 Test Method for Storage Stability of Coatings

        HG/T 2004 Paint for Cement Flooring

        HG/T 2006 Thermosetting Powder Coatings

        HG/T 2009 C 06-1 Iron Red Alkyd Primer

        HG/T 2237 A01-1, A01-2 amino drying varnish

        HG/T 2238 F01-1 Phenolic Varnish

        HG/T 2239 Epoxy ester primer

        HG/T 2240 Moisture cured Polyurethane Coating (Single component)

        HG/T 2245 Nitro Pencil Paint

        HG/T 2247 Rare Earth Drying Agent for Coatings

        HG/T 2277 Various colors of nitro external enamel paint

        HG/T 2453 alkyd varnish

        HG/T 2454 solvent based polyurethane coating (two-component)

        HG/T 2455 Various color alkyd blended paint

        HG/T 2456 Aluminum Powder Slurry

        HG/T 2576 Various color alkyd enamel paint

        HG/T 2592 Nitro Varnish

        HG/T 2593 Acrylic Varnish

        HG/T 2595 Zinc Yellow and Iron Red Perchloroethylene Primer

        HG/T 2596 Colored Perchloroethylene Enamel

        HG/T 2661 Chlorosulfonated polyethylene anti-corrosion coating (two-component)

        HG/T 2881 Determination of paint stripping efficiency of paint stripping agents

        HG/T 2884 Epoxy Asphalt Anti corrosion Coating (Packaging)

        HG/T 3330 Determination of breakdown strength of insulating paint

        HG/T 3331 Determination of Volume Resistance and Surface Resistance Coefficient of Insulation Paint Films

        HG/T 3347 X061-1 Ethylene Phosphating Primer (sub packaged)

        HG/T 3349 Various colors phenolic enamel paint

        HG/T 3352 Various color alkyd putty

        HG/T 3353 A16-51 Colored Amino Drying Hammer Pattern Paint

        HG/T 3354 various colored epoxy ester putty

        HG/T 3355 Various colors of nitro primer

        HG/T 3356 Various colors of nitro putty

        HG/T 3357 Colored Perchloroethylene Putty

        HG/T 3358 G52-31 Various Color Perchloroethylene Anti corrosion Paint

        HG/T 3362 Aluminum Powder Organic Silicon Drying Heat Resistant Paint (two-component)

        HG/T 3369 Cloud iron phenolic anti rust paint

        HG/T 3371 Amino Drying Insulation Paint

        HG/T 3372 alkyd drying insulation paint

        HG/T 3375 Organic Silicon Drying Insulation Paint

        HG/T 3378 Nitro Paint Thinner

        HG/T 3379 Diluent for Perchloroethylene Paint

        HG/T 3380 Amino Paint Thinner

        HG/T 3381 Paint Stripping Agent

        HG/T 3383 Nitro paint moisture-proof agent

        HG/T 3384 Perchloroethylene paint moisture-proof agent

        HG/T 3655 UV cured wood paint

        HG/T 3656 Steel Structure Bridge Paint

        HG/T 3668 Zinc Rich Primer

        HG/T 3792 Cross linked Fluororesin Coating

        HG/T 3793 Hot Melt Fluororesin (PVDF) Coating

        HG/T 3829 Floor Coating

        HG/T 3830 Coil Coating

        HG/T 3855 Preparation Method of Insulation Paint Film

        HG/T 3856 Determination method for water absorption rate of insulation paint film

        HG/T 3857 Test Method for Oil Resistance of Insulation Paint Films

        HG/T 3858 Test Method for Moisture Content of Diluents and Dampproofing Agents

        HG/T 3859 Determination of whitening properties of diluents and moisture-proof agents

        HG/T 3860 Determination of volatility of diluents and moisture-proof agents

        HG/T 3861 Test method for gel number of diluents and moisture-proof agents

        HG/T 3951 Water based color paste for architectural coatings

        HG/T 4104 Water based Fluorine Coatings for Buildings

        HG/T 4340 Epoxy Cloud Iron Intermediate Paint

        HG/T 4343 Waterborne Colorful Architectural Coatings

        HG/T 4344 Water based composite rock flake imitation granite coating

        HG/T 4345 Color Composite Rock Sheets for Coatings

        HJ/T 201 Environmental Labeling Product Technical Requirements Water based Coatings

        HJ/T 414 Environmental Labeling Product Technical Requirements for Solvent based Wood Coatings for Interior Decoration and Renovation

        ISO 10283 Determination of Diisocyanate Monomers in Lacquer based Isocyanate Resins for Paints and Varnishes

        ISO 11341 Artificial climate aging and artificial radiation exposure (filtered xenon arc radiation) for paints and varnishes

        ISO 11507 Coatings of paints and varnishes exposed to artificial weathering, fluorescent UV lamps, and water

        ISO 11890-1 Determination of volatile organic compound (VOC) content in paints and varnishes - Differential method

        ISO 11890-2 Determination of volatile organic compound (VOC) content in paints and varnishes Gas chromatographic method

        ISO 14680-2 Determination of pigment content in paints and varnishes Part 2: Ashing method

        ISO 15184 Paints and Varnishes - Pencil Method for Determining Film Hardness

        ISO 1524 Determination of Grinding Fineness of Paints, Varnishes, and Printing Inks

        ISO 15528 Sampling of raw materials for paints, varnishes, and paints and varnishes

        ISO 2114 Determination of Acid Value and Total Acid Value for Polyester Resins, Paints, and Varnishes Used in Plastics

        ISO 2808 Determination of Film Thickness of Paint and Varnish Coatings

        ISO 2813 Determination of 20 °, 60 °, and 85 ° specular gloss of paints and varnishes without metallic pigments

        ISO 3270 Temperature and humidity for conditioning and testing of coating test specimens

        ISO 3856-1 Determination of "soluble" metal content in paints and varnishes Part 1: Determination of lead content Flame atomic absorption spectrometry and dithizone spectrophotometric method

        ISO 4624 Adhesion Test for Paint and Varnish by Pull off Method

        ISO 4630-1 Assessment of Color Grades for Transparent Liquids - Part 1: Visual Method

        ISO 6272-1 Test for rapid deformation (impact resistance) of paints and varnishes - Part 1: Drop hammer test (large-area punch)

        ISO 6272-2 paints and varnishes - Rapid deformation (impact resistance) test - Part 2: Drop hammer test (small area punch)

        ISO 7784-2 Determination of Wear Resistance of Paints and Varnishes - Rotary Rubber Grinding Wheel Method

        JC 1066 Limit of Harmful Substances in Building Waterproof Coatings

        JC/T 1015 Epoxy Resin Floor Coating Material

        JC/T 1017 Polymer lotion for building waterproof coating

        JC/T 408 water-based asphalt waterproof coating

        JC/T 423 Water soluble Interior Wall Coating

        JC/T 674 Polyvinyl chloride elastic waterproof coating

        JC/T 864 polymer lotion building waterproof coating

        JC/T 975 Waterproof Coating for Bridges

        JG/T 157 Putty for Exterior Walls of Buildings

        JG/T 172 Elastic Building Coatings

        JG/T 210 Primer for Interior and Exterior Walls of Buildings

        JG/T 224 Anti corrosion Coating for Steel Structures in Buildings

        Preparation of JG/T 23 Architectural Coating Test Panels

        JG/T 24 synthetic resin lotion sand wall architectural coating

        JG/T 25 Determination method for freeze-thaw cycle resistance of architectural coatings

        JG/T 26 Inorganic Architectural Coatings for Exterior Walls

        JG/T 298 Putty for Interior Use in Buildings

        JT/T 280 Road Marking Coating

        JT/T 535 Water based Asphalt Waterproof Coating for Road and Bridge

        JT/T 657 Polyaniline Anti corrosion Coating for Transportation Steel Components

        QB/T 3826 Corrosion resistance test method for metal transition layer and chemical treatment layer of light industrial products Neutral salt spray test (NSS) method

        QB/T 3827 Corrosion resistance test method for metal transition layer and chemical treatment layer of light industrial products - Acetic acid salt spray test (ASS) method

        QB/T 3828 Corrosion resistance test method for metal transition layer and chemical treatment layer of light industrial products Copper salt accelerated acetic acid salt spray test (CASS) method

        QB/T 3834 Thickness testing method for metal coatings and chemical treatment layers of light industrial products Magnetic method

        SN/T 1802 Determination of Ethylene Glycol Ether in Indoor Coatings Gas Chromatography Method

        SN/T 1877.6 Determination of Polycyclic Aromatic Hydrocarbons in Coatings, Inks and Their Products

         

         

        QB/T 2568 Solvent based Adhesive for PVC-U Plastic Pipe Systems

        JC/T 550 Polyvinyl Chloride Block Plastic Floor Adhesive

        JC/T 485 Elastic sealant for building windows

        JC/T 484 acrylic building sealant

        JC/T 483 polysulfide building sealant

        JC/T 482 Polyurethane Building Sealant

        JC/T 438 Water soluble Polyvinyl Alcohol Building Adhesive

        JB/T 4254 Liquid Sealing Adhesive

        HJ/T 220 Environmental Labeling Product Technical Requirements Adhesive

        HG/T 3738 solvent based multi-purpose chloroprene rubber adhesive

        HG/T 3698 EVA Hot Melt Adhesive

        HG/T 2814 solvent based polyester polyurethane adhesive

        HG/T 2727 polyvinyl acetate lotion wood adhesive

        HG/T 2492 α - Cyanoacrylate Ethyl Ester Instant Adhesive

        GB/T 7124 Determination of Tensile and Shear Strength of Adhesives (Rigid Materials to Rigid Materials)

        GB/T 7123.2 Determination method for storage period of adhesives

        GB/T 7123.1 Method for determining the shelf life of adhesives

        GB/T 2794 Determination of viscosity of adhesives

        GB/T 2793 Determination of non-volatile matter content in adhesives

        GB/T 2791 Test Method for Peel Strength of Adhesive T Flexible Materials to Flexible Materials

        GB/T 2790 Adhesive 1800 Peel Strength Test Method Flexible Materials to Rigid Materials

        GB/T 15332 Determination of Softening Point of Hot Melt Adhesives Global Method

        GB/T 14732 Wood Industry Adhesives - Urea formaldehyde, Phenolic formaldehyde, Melamine formaldehyde Resins

        GB/T 14683 Silicone Building Sealant

        GB/T 14518 Determination of pH value of adhesives

        GB/T 14074 Testing methods for wood adhesives and their resins

        GB/T 13477.9 Test Methods for Building Sealing Materials Part 9: Determination of Tensile Bonding after Immersion in Water

        GB/T 13477.8 Test Methods for Building Sealing Materials Part 8: Determination of Tensile Adhesion

        GB/T 13477.7 Test Methods for Building Sealing Materials Part 7: Determination of Low Temperature Flexibility

        GB/T 13477.6 Test Methods for Building Sealing Materials Part 6: Determination of Fluidity

        GB/T 13477.5 Test Methods for Building Sealing Materials Part 5: Determination of Surface Drying Time

        GB/T 13477.3 Test Methods for Building Sealing Materials Part 3: Method for Determining the Squeezing Properties of Sealing Materials Using Standard Instruments

        GB/T 13477.2 Test Methods for Building Sealing Materials Part 2: Determination of Density

        GB/T 13477.19 Test Methods for Building Sealing Materials Part 19: Determination of Mass and Volume Changes

        GB/T 13477.17 Test Methods for Building Sealing Materials Part 17: Determination of Elastic Recovery Rate

        GB/T 13477.13 Test methods for building sealing materials Part 13: Determination of adhesion after cold drawing and hot pressing

        GB/T 13477.12 Test methods for building sealing materials Part 12: Determination of adhesion after tensile compression cycles at the same temperature

        GB/T 13477.11 Test Methods for Building Sealing Materials Part 11: Determination of Tensile Bonding after Immersion in Water

        GB/T 13477.10 Test Methods for Building Sealing Materials Part 10: Determination of Tensile Adhesion

        GB/T 13354 Determination of Density of Liquid Adhesives - Weight Cup Method

        GB 24266 Silicone structural sealant for insulating glass

        GB 19340 Adhesive for Shoes and Luggage

        GB 18583 Limit of harmful substances in adhesives for indoor decoration materials

        GB 16776 Silicone structural sealant for buildings

         

         

         

         

        GB/T 14624.1 Color Inspection Method for Offset Printing Ink

        GB/T 14624.2 Test Method for Coloring Strength of Offset Printing Ink

        GB/T 14624.3 Test method for flowability of offset printing ink

        GB/T 14624.4 Test Method for Dry Film of Offset Printing Ink Conjunctiva

        GB/T 14624.5 Test Method for Ink Viscosity

        GB/T 14624.6 Test Method for Ink Viscosity Value Increase

        QB 2930.1 Limits and Determination Methods for Certain Harmful Elements in Ink Part 1: Soluble Elements

        QB 2930.2 Limits and Determination Methods for Certain Harmful Elements in Ink Part 2: Lead, Mercury, Cadmium, Hexavalent Chromium

        GB/T 13217.1 Liquid Ink Color Inspection Method

        GB/T 13217.2 Test Method for Gloss of Liquid Ink

        GB/T 13217.3 Method for Testing the Fineness of Liquid Ink

        GB/T 13217.4 Test Method for Viscosity of Liquid Ink

        GB/T 13217.5 Test Method for Initial Drying of Liquid Ink

        GB/T 13217.6 Test Method for Coloring Power of Liquid Ink

        GB/T 13217.7 Test Method for Adhesion Fastness of Liquid Ink

        GB/T 13217.8 Test Method for Anti Adhesion of Liquid Ink

        QB/T 2929 Solvent based ink solvent residue limit and its determination method

        QB/T 1046 gravure plastic film surface printing ink

        QB/T 1865 offset roll paper cold curing ink (black)

        QB/T 2024 gravure plastic film composite ink

        QB/T 2025 Offset Printing Iron Ink

        QB/T 2026 Hose Roll Coating Ink

        QB/T 2624 single sheet offset printing ink

        HJ/T 371 Technical Requirements for Environmental Labeling Products - gravure ink and flexographic ink

        HJ/T 370 Environmental Labeling Product Technical Requirements Offset Printing Ink

        QB/T 2824 offset printing thermosetting rotary ink

        QB/T 2826 offset UV curable ink

        QB/T 4103 water-based gravure plastic film printing ink

        QB/T 2825 Flexible Edition Water based Ink

         

        Please consult NormalTCI for specific questions

        National Unified Service Hotline: 400-6177-880

        Email [email protected]

        Copyright @ 2015 NORMAL (HANGZHOU) TESTING & CERTIFICATION CO., LTD.  

        Tell:+86-571-28906690  E-mail:[email protected]  Service Hotline:400-6177-880  Fax:+86-571-28867000

        If you have any comments on the website, please email to:[email protected]

      1. <cite id="4k6vu"><listing id="4k6vu"></listing></cite>
      2. 
        
          <dd id="4k6vu"></dd>
            <ul id="4k6vu"><th id="4k6vu"></th></ul>
            <cite id="4k6vu"></cite>

            日韩性感免费无码片 | 老师露出强行让男生揉小说 | 美女张开腿让我插 | 无码骚逼 | 黄色在线播放国产 |